- Bluetooth® Smart
The watch is equipped with energy-saving Bluetooth® technology, which offers power-saving data transfer at the push of a button. The watch can connect to a smartphone wirelessly via Bluetooth®, enabling access to a wide range of useful functions.
- GPS-accurate time
Thanks to the GPS receiver, the watch always displays the GPS-accurate time no matter where you are in the world.
- Smartphone time
Local time will automatically be adjusted whenever the watch is connected with a smartphone.
- Super-Full-Auto LED light
If the ambient light fades, a turn of your wrist illuminates the watch display particularly brightly.
Shock-resistant construction protects against impact and vibration.
- Low-temperature resistant (-20 °C)
Even temperatures as low as -20 °C have no effect on this watch.
- Mud-resistant case
Dirt- and mud-resistant construction keeps mud and dirt from getting into the watch.
- Solar Power
A solar cell provides power for operation.
- Barometer (260 / 1.100 hPa)
A special sensor measures the air pressure (measuring range: 260/1100 hPa) and presents this on the display in the form of a symbol. This enables early detection of weather trends.
- Thermometer (-10°C / +60°C)
A sensor measures the ambient temperature around the watch and displays it in °C (-10°C /+60°C).
A built-in direction sensor detecs the magnetic north.
- Sunrise/sunset display
After entering the geographical location, sunrise and sunset times can be displayed for any given date.
- Moon Phase Indicator
The moon phase indicator shows the current moon phase based to the earth
- Tide indicator
Once the high tide time has been entered for a selected location, the watch can display the low and high tide phases at this location on any given date. This can be quite useful, for example, if you want to know the patterns of the tides at your destination in advance.
- 10,000 m Altimeter
A pressure sensor detects changes in the air pressure and converts the result into an altitude up to 10,000 m.
- GPS function
Measures your current position using artificial satellites circling the globe.
- Height Gain
The height gain sums all the meters you have climbed in a session, so that you can see at a glance the total ascent on a tour.
- Altimeter data memory
Depending on the model, up to 40 sets of elevation data can be stored in the watch's data memory and re-accessed at any time. Each of these data sets consists of a measured altitude as well as the date and time. In addition to the individual altitudes, the maximum and minimum altitudes during a measurement are also stored.
- Navigation System
Destinations can be set via app. The watch determines own position as well as the position of your target with the help of GPS and shows direction of your destination on its display.
- World time function
Displays the current time in major cities and specific areas around the world.
- Stopwatch function - 1/100 sec - 1.000 hours
Elapsed time, split time and final time are measured with 1/100-sec accuracy. The watch can measure times of up to 1000 hours.
- Timer - 1/1 Sek. - 1.000 Std.
- 4 daily alarms
The daily alarm reminds you about recurring events with an acoustic signal at the time you have set. This model has four independent alarms for flexible reminders of important appointments.
- Snooze feature
Each time you stop the alarm, it sounds again after a few minutes.
- Button tones on/off
The button tones for using the mode button can be turned off. This means that the watch no longer beeps when switching from one function to another. Preset alarm or countdown timers remain active when the button tones are deactivated.
- Smart Access Technology
Smart Access makes it easy to operate multi-function watches. Simply pulling out and rotating the crown provides intuitive control over all functions
- Automatic calendar with Date, Day and Month
Once set, the automatic calendar always displays the correct date.
- 12/24-hour timekeeping
Times can be displayed in either a 12-hour or 24-hour format.
- Sapphire crystal
Artificially manufactured glass with the hightest hardness and scratch resistance
- Resin case
- Carbon-resin wrist strap
On their own, carbon and resin are stress-resistant and durable — together they create a wrist strap that is extra robust and extremely durable. And the "carbon design" on the wrist strap not only looks elegant, it also lends the watch a sporty, dynamic touch.
- Battery level indicator
An indicator shows the current battery level.
- Water resistance classification (20 bar)
Perfect for free diving without scuba gear: the watch is water resistant up to 20 bar according to ISO 22810.
- Dimensions (H x W x D)
60,3mm x 57,7mm x 20,2mm
approx. 142 g
Availability of models and/or lineups may differ depending on the country or region.
Technical amendments and errors excepted. The sizes in figures do not correspond to the original sizes.
The colours may differ slightly from the original.