- Bluetooth® Smart
The watch is equipped with energy-saving Bluetooth® technology, which offers power-saving data transfer at the push of a button. The watch can connect to a smartphone wirelessly via Bluetooth®, enabling access to a wide range of useful functions.
- Smartphone time
Local time will automatically be adjusted whenever the watch is connected with a smartphone.
- Full-Auto LED light
A twist of the wrist in weak light conditions automatically lights up the display backlight.
Shock-resistant construction protects against impact and vibration.
- Solar Power
A solar cell provides power for operation.
- Calorie consumption display
This function calculates the calories you have used and stores the result in the memory.
- Heart rate target alarm
An alarm sounds as soon as a preset heart rate zone is reached.
- Optical heart rate monitoring
An optical sensor on the back of the watch case measures the heart rate on the wrist using light-emitting diodes (LEDs). The measured values are displayed on the watch.
- Barometer (260 / 1.100 hPa)
A special sensor measures the air pressure (measuring range: 260 / 1100 hPa) and presents this on the display in the form of a symbol. This enables early detection of weather trends.
- Thermometer (-10°C / +60°C)
A sensor measures the ambient temperature around the watch and displays it in °C (-10°C /+60°C).
A built-in direction sensor detecs the magnetic north.
- 10,000 m Altimeter
A pressure sensor detects changes in the air pressure and converts the result into an altitude up to 10,000 m.
- Height Gain
The height gain sums all the meters you have climbed in a session, so that you can see at a glance the total ascent on a tour.
- Altimeter data memory
Depending on the model, up to 40 sets of elevation data can be stored in the watch's data memory and re-accessed at any time. Each of these data sets consists of a measured altitude as well as the date and time. In addition to the individual altitudes, the maximum and minimum altitudes during a measurement are also stored.
- Acceleration sensor
The motion sensor responds to acceleration and shows this as a speed on the display.
The watch has a built-in 3-axis accelerometer that counts the steps you take and indicates the numbers on the display.
- Training Planner
The Training Planner supports your personal training goals and gives a signal by reaching predefined targets. For example, a specific calorie consumption or a certain work out time can be set in advance in order to control the workout individually.
- Training Analysis
This function shows training status, fitness level and training load as well as regeneration times. This information provides a good basis for planning further training sessions.
- Training Log
A training log stores the number of steps, calorie consumption as well as distance and lap times and helps to compare training units.
The VO2max value is an indicator for aerobic training and shows the individual fitness level of a person. A lower VO2max value is an indicator of a poorer fitness level, whereas a higher VO2max indicates a higher level of performance. Regular training can improve the VO2max value.
- VO2max recovery time
Good training needs regeneration. In order to make the training as effective as possible, there is the display for the VO2max recovery time, which shows the recovery time required until your body has recovered from the previous training. Then the next session can start.
- Activity App
The watch features several workout modes that can be set in advance in order to individually evaluate and control the corresponding activity. By using the "Swimming" mode as an example, the focus is more on the calorie consumption and the distance, whereas in the "Running" mode, the heart rate and speed are shown in detail.
- GPS speed-distance measurement
High-tech for demanding runners: The watch uses GPS technology to measure the current running speed and distance covered. All data are individually indicated on the display.
- Sunrise/sunset display
After entering the geographical location, sunrise and sunset times can be displayed for any given date.
- World time function
Displays the current time in major cities and specific areas around the world.
- Stopwatch function - 100 hours
Measures with an accuracy of seconds the meantime and the end time. Signals confirm the starting/stop selection. The measuring capacity reaches up to 100 hours.
- Lap memory 100
Measured total, lap and split times can be stored in a memory with the date and can be displayed again later. A data set consists of: date, total, lap and split times. The memory has enough space for up to 100 data sets.
- 5 Timer - 1/1 Sec. - 60 Min. (with automatic repeat)
The count-down timer gives a signal by reaching the set time. The measuring capacity reaches up to 60 minutes. The timer can count back automatically again from the preset time. Five of these countdown alarms can be set independently.
- 4 daily alarms
The daily alarm reminds you about recurring events with an acoustic signal at the time you have set. This model has four independent alarms for flexible reminders of important appointments.
- Vibration alert
The vibration alarm discreetly reminds you of important appointments, without emitting a loud signal.
- Snooze feature
Each time you stop the alarm, it sounds again after a few minutes.
- Button tones on/off
The button tones for using the mode button can be turned off. This means that the watch no longer beeps when switching from one function to another. Preset alarm or countdown timers remain active when the button tones are deactivated.
- Incoming emails display
When you receive an email, the sender will appear on the display.
- Phone Finder
Misplaced your smartphone? All it takes is the push of a button on your watch and the smartphone sounds an alarm.
- Automatic calendar with Date, Day and Month
Once set, the automatic calendar always displays the correct date.
- 12/24-hour format
Times can be displayed in either a 12-hour or 24-hour format.
- Mineral glass
The tough mineral glass resists scratching.
- Bio-based resin case
- Bio-based resin band
The bracelet is equipped with a buckle.
- Battery level indicator
An indicator shows the current battery level.
- Water resistance classification (20 bar)
Perfect for free diving without scuba gear: the watch is water resistant up to 20 bar according to ISO 22810.
- USB Charger
Charging option via clip and USB charging cable.
- Dimensions (H x W x D)
59,6mm x 52,6mm x 19,4mm
approx. 63,0 g
Availability of models and/or lineups may differ depending on the country or region.
Technical amendments and errors excepted. The sizes in figures do not correspond to the original sizes.
The colours may differ slightly from the original.