|Full-Auto Illuminator |
Automatically deactivates the Auto EL backlight function when surrounding light is sufficient, and activates it under dim light or dark conditions.
|Low-temperature resistant (-10 °C) |
Even temperatures as low as -10 °C have no effect on this watch.
|Solar Power |
A solar cell provides power for operation.
|Radio signal reception (EU, USA, Japan, China) |
Whether in Europe, North America and Japan or in the outer reaches of Canada, Central America and China - once the watch has been set to the local time, it receives the relevant signal and shows the correct time wherever you are. In many countries, it also sets itself automatically to summer and winter time.
|Duplex LCD |
Giving you a constant overview: Elements on the display are distinguished from one another using colour. This is achieved using different coloured layers placed on top of one another, allowing information to be displayed more clearly.
A built-in direction sensor detecs the magnetic north.
|10,000 m Altimeter |
A pressure sensor detects changes in the air pressure and converts the result into an altitude up to 10,000 m.
|Height Gain |
The height gain sums all the meters you have climbed in a session, so that you can see at a glance the total ascent on a tour.
|Altimeter data memory |
Depending on the model, up to 40 sets of elevation data can be stored in the watch's data memory and re-accessed at any time. Each of these data sets consists of a measured altitude as well as the date and time. In addition to the individual altitudes, the maximum and minimum altitudes during a measurement are also stored.
|Barometer (260 / 1.100 hPa) |
A special sensor measures the air pressure (measuring range: 260/1100 hPa) and presents this on the display in the form of a symbol. This enables early detection of weather trends.
|Thermometer (-10°C / +60°C) |
A sensor measures the ambient temperature around the watch and displays it in °C (-10°C /+60°C).
|Moon data display |
The phase of the moon is shown on the display based on your current latitude and longitude.
|Tide graph display |
Tidal movements are displayed graphically based on your current latitude and longitude, and the lunitidal interval.
|World time function |
Displays the current time in major cities and specific areas around the world.
|Stopwatch function - 1/100 sec. - 24 hours |
Elapsed time, split time and final time are measured with 1/100-sec accuracy. The watch can measure times of up to 24 hours.
|Timer - 1/1 min. - 1 hour |
For fans of precision: the countdown timers help you to remember specific or recurring events by giving off an audible signal at a preset time. The time can be set to the nearest minute and up to 1 hour in advance.
|Yacht timer without automatic repeat function |
The perfect prerequisite to every regatta and yacht race: The countdown start time can be set within a period of 1 to 10 minutes, usually 5 minutes. An audible signal sounds once after every elapsed minute. For the last ten seconds before the start, the signal sounds every second.
|5 daily alarms |
The daily alarm reminds you about recurring events with an acoustic signal at the time you have set. You can also activate hourly time signal that indicates each full hour. This model has 5 independent alarms for flexible reminders of important appointments.
|Button tones on/off |
The button tones for using the mode button can be turned off. This means that the watch no longer beeps when switching from one function to another. Preset alarm or countdown timers remain active when the button tones are deactivated.
|Automatic calendar |
Once set, the automatic calendar always displays the correct date.
|12/24-hour timekeeping |
Times can be displayed in either a 12-hour or 24-hour format.
|Direction Bezel |
This bezel can be used to determine approximate directions.
|Mineral glass |
The tough, scratch-resistant mineral glass protects the watch against unsightly damage.
|Resin case |
|Resin band |
Synthetic resin is the ideal material for wrist straps thanks to its extremely durable and flexible properties.
|Battery level indicator |
An indicator shows the current battery level.
|Water resistance classification (20 bar) |
Perfect for free diving without scuba gear: the watch is water resistant to 20 bar / 200 metres. The metres value does not relate to a diving depth but to the air pressure used in the course of the water resistance test. (ISO 22810)
|Type of battery|
approx. 56,3mm x 50,6mm x 15,0mm (H x W x D)
approx. 80,6 g